Duct Materials
The duct shall be extruded from either medium density polyethylene type II, class C, category 5, or high density polyethylene type III, class C, category 5 as outlined in ASTM D1248.  Available in black or orange as shown.

Duct Dimensions
The following duct dimensions are recommended, however, 7mÊÓƵ will provide duct to customer's required dimensions when specified.


The cable shown in the illustration is
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 

Item #

Conduit
Size
(in)

Conduit
Outer
Diameter
(in)

Minimum
Wall
Thickness
(mls)

Bending
Radius
(in)

Max.
Cable
Diameter

Typical
Unjacketed
Cond. Size

Elongation
(%)

Melt
Index
Max

Brittleness
Temp.
ºC max.
Medium

Brittleness
Temp.
ºC max.
High

N/A 1 1/4 N/A 1.66 N/A 100 N/A 18 N/A 1.05 N/A #2 through 2/0 N/A 400 N/A .4 N/A -45º°ä N/A -75º°ä
N/A 1 1/2 N/A 1.90 N/A 115 N/A 21 N/A 1.20 N/A 1/0 through 250 N/A 400 N/A .4 N/A -45º°ä N/A -75º°ä
N/A 2 N/A 2.38 N/A 145 N/A 26 N/A 1.5 N/A 4/0 through 500 N/A 400 N/A .4 N/A -45º°ä N/A -75º°ä
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1